POLAR AW200 - Manual (Page 25)

Time of Day
To set Time 1, start in TIME mode and select
Menu WATCH SET > Set TIME > Set TIME 1 *.
Change the flashing value ( 12/24h, AM/PM,
HOURS, MIN ) with UP/DOWN.
*To set Time 2, press UP to Set TIME 2 , then
START and UP/DOWN to enter the time difference
measured from Time 1.
To accept the flashing value, press START.
To change the view between Time 1 and Time 2,
in TIME mode press and hold DOWN.
Date
To set the date, start in TIME mode and select
Menu WATCH SET > Set DATE .
Change the flashing value ( DD, MM, YY ) with
UP/DOWN.
To accept the flashing value, press START.
Sound On/Off
The sound settings ( ON/OFF ) do not affect the
alarms.
Start in TIME mode and select Menu WATCH SET >
Set SOUND ON/OFF .
To select ON or OFF , press UP/DOWN.
E N G L I S H
Settings 25