POLAR AW200 - Manual (Page 24)

6. SETTINGS
Watch Settings
To access the watch settings Alarm, Time, Date,
Sound, Units, Alti Auto & Intro , start in TIME
mode, press START and select Menu WATCH SET .
Scroll UP and select the setting you want to
change.
To return to the previous menu at any stage of the
settings, press STOP. To return to TIME mode,
press and HOLD the STOP button.
Daily Alarm On/Off
Start in TIME mode and select
Menu Watch Set > Set ALARM hh:mm On/OFF >
Alarm SET .
To change the flashing value ( On/OFF, AM/PM,
HOURS, MIN ), press UP/DOWN buttons. To accept
the flashing value, press START.
When the alarm is turned on, you should see an
alarm symbol on the display.
When the alarm goes off, Daily Alarm! appears in
the display. It sounds for one minute unless
turned off by pressing STOP.
To snooze 10 minutes, press any button on the
right side of the wrist unit.
Press STOP to cancel snoozing time.
Unless you deactivate the alarm feature in Menu
Watch Set , the alarm will go off daily at the set
time.
E N G L I S H
24 Settings