Philips VR 510/07 - Manual (Page 9)

E
NGLISH
C
ONNECTING ADDITIONAL DEVICES
9 9
5 Take the enclosed mains cable and connect
the appropriate ends to the mains socket 4 4
on the back of the video recorder and the
other to the nearest free socket
6 Switch on your TV set and select on your TV
set the programme number which will in
future be used for operation with the video
recorder
7 On your TV change the settings of this
programme number until you see the
adjacent welcome screen clearly and in
colour on the screen
PPRRO OBBLLEEM M
8 Switch off the video recorder with the
standby button m m..
8 8 TThheerree iiss nnoo tteesstt iim maaggee
4 4 Your video recorder “broadcasts” on the
frequency 583MHz (CH35) in the UHF range (ultra
highfrequency). Repeat the matching of the
selected programme numbers on the TV set.
4 4 Check the cable connections
3 Remove the aerial cable plug from the back of
your TV set and insert it into the aerial socket
2 2on the back of the video recorder
4 Take the enclosed aerial cable and connect
the appropriate end to the aerial socket of
your TV set and to the TV socket 3 3 on the
back of the video recorder
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
CONTINUEPOK
C Coonnnneeccttiinngg aaddddiittiioonnaall ddeevviicceess
Additional devices, such as a decoder, camcorder, satellite receiver, etc., can be
connected to the scart socket A AVV22 EEX XTT22 on the back of the video recorder.
You will need a scart cable for this (available from specialist stores).
There are two audio output sockets on the back of the video recorder -
A AU UD DIIO O O OU UTT LL RR.You can connect a stereo system to these.
AV2 EXT2
AUDIO OUT