Philips VR 510/07 - Manual (Page 34)

34 34
“T
URBO
T
IMER
”-R
ECORDING
E
NGLISH
5 The display shows the programme number to
which the video recorder is currently set, e.g.:
“PROG. 01”. Change – if necessary – the
displayed start time with ==PP-- or ;;PP++.. Confirm
with the TTU URRBBO O TTIIM MEERR button. The display
briefly shows “OK”.
1 Press the TTU URRBBO O TTIIM MEERR button on the
remote control.
““TTuurrbboo TTiim meerr””--RReeccoorrddiinngg
2 The display shows the actual starting time, e.g.:
“START 20:00”. Change – if necessary – the
displayed start time with ==PP-- or ;;PP++..
FFO ORR
EEX XPPEERRTTSS
A Accttiivvaattee VVPPSS//PPD DC C
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. Use SSEELLEEC CTT to switch
recognition of these signals on (VPS / PDC appears in
the display) or off.
3 Confirm with the TTU URRBBO O TTIIM MEERR button
4 The display shows a suggestion for the end of
the recording e.g.: “END 22:00” (Start time
+ 2 hours). Change – if necessary – the
displayed start time with ==PP-- or ;;PP++.. Confirm
with the TTU URRBBO O TTIIM MEERR button
0 1
k
2 0 : 0 0
k
2 2 : 0 0
k
Using the “Turbo Timer”, you can make a programmed
recording within the next 24 hours quickly and simply,
without having to switch on the TV set. All you need to
do now is enter or confirm the desired programme
number and start and finish time in the video recorder.