Philips VR 510/07 - Manual (Page 43)

43 43
E
NGLISH
S
WITCHING THE MODULATOR ON AND OFF
SSw wiittcchhiinngg tthhee m moodduullaattoorr oonn aanndd ooffff
If picture and sound interference cannot be removed by optimizing the
modulator, the integral modulator can be switched off.Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator
switched off without a scart cable.
FFO ORR
EEX XPPEERRTTSS
7 Leave the on-screen menu with the M MEEN NU U
button
6 Confirm the new modulator frequency with
O OK K. In the display there will briefly appear “OK”
SSw wiittcchhiinngg ooffff tthhee m moodduullaattoorr
If you have connected the video recorder to the TV set
with a scart cable, you can switch off the modulator
when there is interference with the picture or sound
(see below).
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
3 The video recorder will now transmit a test
image on this frequency
2 Press at the same time the SSTTO OPP button h h
on the remote control and the SSTTO OPP//EEJJEEC CTT
button J J on the front of the video recorder
until the modulator frequency of the set
appears in the display (e.g.: “M583” for
583 MHz)
4 Use ==PP-- or ;;PP++ to select the option
“MODULATOR”
7 Leave the on-screen menu with the M MEEN NU U
button
6 Confirm with O OK K. In the display there will
briefly appear “OK”
5 Use S S++ P P or Q QS S-- to select the setting
“ON” (Modulator on) or “OFF” (Modulator off)
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCYQ583P
MODULATOR ON
EXITPMENU STOREPOK
?