Philips E-GSM 1800 - Manual (Page 8)

2 Getting Started
Replace the battery as shown below, connectors
downwards.
Replace the back cover as shown below: hook the
housing into the hindge on the top of the phone, then
press the bottom down until the latch catches.
Remove the protective film covering the screen, the
camera and the infrared lenses before using the phone.
Switching on the phone
To switch on the phone, long-press the ) key.
Enter the PIN code if required. A PIN code is a 4- to
8-digit secret code for your SIM card. It is
preconfigured and communicated to you by your
operator or retailer. For more information on PIN
codes, see “Display” on page 42.
If you enter an incorrect PIN code three times, your
SIM card will be blocked. To unblock it, you must
request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
Set date To set the current date.
Set time To set the current time.
See “Settings” on page 39 for details on these three
items.
Copy SIM
names into
the phone? If your phone detects any names and
telephone numbers in the SIM card
phonebook, you will be asked if you
want to copy them into the onboard
phone book. If you wish to copy the
numbers, press
Yes , otherwise press
No .
Philips362-V2_GB_4311 255 63391.book Page 2 Mardi, 5. juillet 2005 2:42 14