Alarm clock, Snooze mode, Infrared – Philips E-GSM 1800 User Manual
Page 20
14
Business
Press
R
Back
to access the list of all recordings.
When you select a sound file, it is played
automatically in a loop. Press
OK
to access the
options. You can
Play recording
,
Rename
or
Delete
it,
Set as ringer
,
As SMS/MMS ringer
or
As reminder
. You
can also send it by Email, IrDA or MMS.
A flashing warning sign indicates that your recording
will soon reach the maximum authorized length. If
you do not stop recording, a red envelope icon informs
you that your recording is too long to be sent via MMS.
Alarm clock
Your mobile phone has a built-in alarm clock
with a snooze feature. You can set up to three
separate alarms and choose whether or not
the alarm should repeat. To set an alarm, follow the
steps below:
1.
Select an alarm and set it
On
.
2.
Then enter the time and press
OK
.
3.
Then select the frequency:
Once, Every day, On
weekdays
.
4.
Finally, select the type of alarm: the
Buzzer
or a
melody from the sounds album and press
OK
.
Repeat above steps to set other alarms.
The alarm clock will ring even if your mobile phone is
switched off and/or the ringer volume is set to Silent.
When the alarm rings, press any key to stop it (except
if the snooze mode is on, see below).
Snooze mode
This menu allows you to set the snooze mode
On
or
Off
. When the alarm rings and the snooze mode is
On
:
•
press any key (except
R
Stop
) to stop the ring-
ing temporarily. The alarm will ring again
around 7 minutes later.
•
press
R
Stop
to stop the ringing and the alarm
repetition.
The snooze mode is automatically deactivated after 9
alarm repetitions.
The snooze mode setting applies to all the alarms you
have set.
Infrared
Your mobile phone has an infrared port that
allows you to send or receive data to or from
other infrared-compliant devices (e.g.
another mobile phone, a computer, a PDA, etc.)
through a wireless link.
Philips362-V2_GB_4311 255 63391.book Page 14 Mardi, 5. juillet 2005 2:42 14