Planet Technology POE-151 - Manual (Page 4)

- 4 -
1. INTRODUCTION
1.1 Checklist
Thank you for purchasing our POE-151 IEEE 802.3af Power over Ethernet Injector, your Power over Ethernet
Injector package shall contains following contents:
Check the contents of your package for following parts:
Power over Ethernet Injector x1
User's manual CD x1
Power Adapter x1
Power cord x 1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton
including the original packing material, and use them against to repack the product in case there is a need to return it to
us for repair.
1.2 About the Power over Ethernet Injector
The POE-151 is an IEEE 802.3af Power over Ethernet Injector that provide DC 48V over Ethernet cables. The POE-151
IEEE 802.3af Power over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the cable between the Injector
(POE-151) and Splitter (POE-151S-5V/9V/12V) to transfer data and power simultaneously. The maximum distance be-
tween the Injector (POE-151) and Splitter (POE-151S-5V/9V/12V ) is 100 meters. With POE-151 installed, it is combines
the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3af Power over Ethernet Injector. And the
IEEE 802.3af Power over Ethernet splitter shall separate the digital data and the power into two outputs.
With IEEE 802.3af Power over Ethernet devices installed, the system administrator only have to use a single RJ-45
Ethernet cable to carries both power and data to each devices. Besides, to connect through POE-151 and
POE-151S-5V/9V/12V, you could also have following benefit that, cost saving, easy for networking planning and higher
reliability. What’s more, upon any IEEE 802.3af devices installed, the POE-151 or POE-151S-5V/9V/12V all can make the
connection while migrating or splitting the power and the Ethernet digital packets, such as connecting the POE-151 to an
IEEE 802.3af complied devices, AP or IP phone.
1.3 Features
Comply with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX
Provide DC 48V power over RJ-45 Ethernet cable to device with Ethernet port
LED indicators power input indication
Distance up to 100 meters
Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation
Work with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX
EMI standards comply with FCC, CE class B