Philips CE130 - Manual (Page 16)

17
• [DEMO ON] : Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
• [DEMO OFF] : Turn off the demo
mode.
Reset
You can reset the unit to its default setting.
1
Detach the front panel.
2
Press the reset button by using a ball-
point pen or a similar tool.
Preset adjustments such as preset
»
channels and sound adjustments are
erased.
RESET
7 Adjust system
settings
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn on or off this beep sound.
1
Press MENU.
2
Press / repeatedly until [BEEP]
displays.
3
Rotate to select a setting:
• [BEEP ON]: Turn on the beep
sound.
• [BEEP OFF]: Turn off the beep
sound.
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU.
2
Press / repeatedly until [BKO] is
displayed.
3
Rotate to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.
Turn demo mode on/off
1
Press MENU.
2
Press / repeatedly until [DEMO]
displays.
3
Rotate to select a setting:
English
EN