Phase Technology RS600i - Manual (Page 3)

Technical data, EASE ™ plots, SoundTubeSPEC ™ software & product downloads available at www.soundtube.com
RS600i Open-Ceiling Speaker
Technical Information for System Engineers
Applications
Designed for indoor & outdoor back-
ground to mid-level SPL applications,
the RS600i includes a single-point
mounting system for rapid open-ceiling
installations with an optional SM6
bracket for surface-mount applications.
The broad dispersion pattern (45 Hz –
10 kHz, EASE ™ documented) and high
sensitivity (90.5 dB 1W/1M) make the
RS600i speaker ideal for retail, restau-
rants, grocery stores, hotels, casinos,
fitness centers, conference rooms, big
box stores, museums, trade shows &
airports and other open-ceiling applica-
tions. For applications where additional
bass is required, SoundTube’s RS801i 8”
subwoofer provides bass down to 40 Hz.
BroadBeam ® Wide
Dispersion Technology
More than 3 years in development,
SoundTube’s proprietary BroadBeam ®
technology incorporates a high-fre-
quency waveguide mated to a 1” convex
aluminum tweeter. The BroadBeam ®
high-frequency waveguide delivers a
consistent dispersion pattern across
the upper registers of the frequency
spectrum (up to 10 kHz, EASE ™ docu-
mented). The result is an audio system
with fewer speakers, reduced power
needs, shorter installation time and cost
savings on shipping & labor.
Patented SoundTube
Technologies
SoundTube Entertainment is con-
stantly developing new technologies
that enhance audio product perfor-
mance. SoundTube Entertainment inno-
vations are protected by multiple U.S.
& international patents, which explic-
itly cover SoundTube dispersion, enclo-
sure & dome technologies. SoundTube
Entertainment actively defends its pat-
ents in order to protect SoundTube
resellers and end users.
Technical Data and
Specification Tools
Technical Data
SoundTube Entertainment strives to
provide complete and effective technical
information and data to dealers, engi-
neers and designers. All data are avail-
able from SoundTube Entertainment or
at www.soundtube.com.
Data Acquisition
All performance data acquired at
SoundTube’s Technical Measurement
Center (TMC) are analyzed using a
variety of standard measurement tech-
niques, including Measured Length
Sequence (MLS) and Time Delay Spec-
trometry (TDS). Performance, develop-
ment and data acquisition tools include:
Gold Line TEF 20, CLIO, LMS, LEAP,
and proprietary modeling software.
EASE ™ data are acquired through an
automated TEF 20/Outline/EASE ™ inter-
face.
EASE™ Data – 3-D polar plots.
SoundTubeSPEC™ – Proprietary
SoundTube speaker placement software.
Architectural Specifications
The loudspeaker shall consist of a 165
mm (6.5 in) low-frequency transducer and
a 25 mm (1.0 in) high-frequency transducer
with a crossover network installed in the
ported enclosure. The low-frequency voice
coil diameter shall be 25 mm (1.0 in).
Performance specifications of a typi-
cal production unit shall be as follows:
Useable frequency response shall extend
10,000 Hz 8,000 Hz 4,000 Hz 2,000 Hz
1,000 Hz 500 Hz 250 Hz 125 Hz
Polar Plots