Phase Technology RS1001i-II User Manual

Rs1001i, Open-ceiling speaker

Key Features

• One 254 mm (10.0 in) polypropylene

woofer mounted to a proprietary cast-

aluminum M8

™

baffle and heat sink.

• Weatherized components for indoor

& outdoor applications.

• Includes hanging hardware with aircraft

cables and integrated SpeedClamp

™

self-locking cable grip for fast, easy &

secure installation.

• Patented ZeroReflection

™

enclosure tech-

nology for optimal sound reproduction

& cabinet rigidity. Also includes Eurob-

lock connector & terminal weather boot.

• Easy access 5-position selectable tap

switch for 25, 70.7 and 100 Volt applica-

tions with 4 Ohm bypass simplifies

ordering and inventory tracking.

• Iridite-plated steel grille with protective

powder-coated finish for lasting durability.

• 93.5 dB Sensitivity offers high-output

capabilities & reduced amplification costs.

• UL 1480 rev. 5, CE approval (EMC Direc-

tive 89/366/EEC, EN55020, EN55013), Mil-

spec 810 & IEC529 approval pending.

• High-quality black or white paint finish.

Custom paint colors optional.

Description

The RS1001i-II is a 10” subwoofer with

an open-ceiling enclosure design that

delivers additional low-end response (40

Hz) for satellite/subwoofer applications.

The RS1001i-II speaker design incorporates

a low-profile grille, 5-position tap switch

with voice coil/4 Ohm direct. Hanging

hardware is included & features Speed-

Clamp

™

self-locking cable grip for fast,

easy & secure installation.

Applications

Designed for indoor & outdoor back-

ground subwoofer applications, the

RS1001i-II includes a single point mount-

ing system for rapid open-ceiling installa-

tions. True low-end response (40 Hz) and

high sensitivity (90.5 dB 1W/1M) make

the RS1001i-II ideal for additional bass

response in retail, restaurants and other

open-ceiling subwoofer applications.

RS1001i

Open-Ceiling Speaker

Technical Information for System Engineers

SoundTube continually develops new product innovations and improvements. Updates to existing

products without prior notice are an example of SoundTube’s drive for constant improvement.

Specifications: RS1001i-II

System Type

Impedance (nominal)

Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M

Distance Factor
Frequency Response (- 3 dB)

Frequency Response (-10 dB)

Max. Program Power

Max. Continuous Power RMS

Max. UL program power
Max. Power SPL @ 1 M

Max. SPL @ x% distortion

Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer - High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Height (SM = Height)
Diameter (SM = Width)
Weight
Shipping Weight
Accessories
Included

Packaging

10” Subwoofer, open-ceiling, ported (150 Watt optional
transformer for 25/70.7/100 Volt or 4 ohm direct)
4 ohm
93.5dB
90.5dB
N/A
53 Hz - 120 Hz
40 Hz - 300 Hz
300w
150w
100w
112.5dB
N/A
N/A
N/A

N/A
N/A
5-Position rotary switch with 4 ohm direct
1 x 254mm (10in) Polypropylene cone, butyl rubber surround
N/A
35.0mm 1.38in
100.0 kHz
6dB per octave, 1st order
N/A
Injection molded ABS, glass fiber reinforced
N/A
Iridite-plated steel with powder-coat finish
4 Pin, 5mm Euroblock for individual or daisy chain connection
Black or white

17.23 in / 437.6 mm
14.82 in / 376.4 mm
27.0 lb / 12.3 kg
32.5 lb / 14.8 kg

Hanging hardware, Euroblock connector & terminal
weather boot

1 per box
Transformer Taps
70.7 V Output

100 V Output

25 V Output

Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance

1w1m sensitivity determined using nominal
impedance

Frequency response measured in half or
full space as dictated by speaker mounting
configuration

Max program power is 3 dB above max
continuous power

Continuous power rating, EIA-426-B test
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs

150w 112.5dB

75w 109.5dB

38w 106.5dB

19w 103.5dB

150w 112.5dB

75w 109.5dB

38w 106.5dB

19w 103.5dB

9.5w 100.5dB
4.8w 97.5dB
2.4w 94.5dB