Panasonic SC-AK310 - Manual (Page 4)

RQT6693
4
Batteries
The remote control
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
• Keep the transmission window and the unit’s sensor free from dust.
• Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not:
• put heavy objects on the remote control.
• take the remote control apart.
• spill liquids onto the remote control.
• Insert so the poles (+ and –) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short-circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
• keep together with metallic objects such as necklaces.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even
when held close to the front panel.
Use
R6, AA, UM-3
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or
web site (http://www.panasonic.com).
AC power supply cord ..... 1 pc.
(RJA0065-A)
FM indoor antenna .......... 1 pc.
(RSA0006-L)
Remote control
transmitter ....................... 1 pc.
SC-AK310
(N2QAGB000025)
SC-AK110
For U.S.A: (N2QAGB000025)
For Canada: (N2QAGB000029)
AM loop antenna ..... 1 pc.
(N1DADYY00002)
Batteries ................ 2 pcs.
R6, AA, UM-3
Remote control
signal sensor
Transmission
window
About 7 meters in front of
the signal sensor
Supplied accessories
Placement of speakers
Place the speakers so that the super tweeter is on the outside.
Speakers are designed identically so that no left or right channel
orientation is necessary.
SC-AK110