Introduction of xmoperation 37, Xmoperation 37, Swiching the xmchannel select – Pioneer DEH-P350 User Manual

Page 37: Setting 37, Introduction of xmoperation, Other functions

Introduction of XMoperation

You can use this unit with a separately sold uni-

versal XM satellite digital tuner system (GEX-

FM913XM) or XM satellite digital tuner (GEX-

P910XM).

For details concerning operation, refer to the

XMtuners operation manuals. This section

provides information on XMoperations with

this unit which differs from that described in

the XMtuners operation manual.

1 XM tuner information

Shows the XMtuner information which has

been selected.

2 XM channel number indicator

Shows to which XMchannel number the

tuner is tuned.

! If a channel number 100 to 199 is se-

lected, d will light up above the last two

digits of the XMchannel number.

! If a channel number 200 or more is se-

lected, d will blink above the last two di-

gits of the XMchannel number.

XMoperation

XMoperation of the following function with

this unit differs.

Swiching the XMchannel select

setting

You can switch if you select a channel with a

channel number or from a channel category

when you select a channel.

1 Press CLOCK and hold to switch the

channel select setting.

2 Press CLOCK to select the desired chan-

nel select setting.

Press CLOCK repeatedly to switch between

the following channel select settings:

CHNUMBER (channel number select mode)

CATEGORY (channel category select

mode)

Other Functions

English

Section

HHHHHHHHHHHHHH