Philips MIIC-201D/U - Manual (Page 2)

Introduction
The MCC iPort™ DLL/USB to I
2
C Host Adapter (#MIIC-201D/U) allows any
Windows 98se, 2000, XP, or higher PC, with a free USB port or self-powered USB
hub, to become an I
2 C Master or Slave device, transmitting or receiving I 2 C
messages between the PC and one or more I 2 C devices across an I 2 C Bus.
This user’s guide describes the installation and operation of the iPort DLL/USB I 2 C
Bus host adapter and the iPort Utility Pack Software for Windows.
Are you new to I
2
C? Want to know more? We suggest you review “What is I
2
C?” at
www.mcc-us.com/I2CBusTechnicalOverview.pdf.
MCC products use Philips components and are licensed to use the I²C Bus.
“Purchase of Philips I²C components conveys a license under the Philips’ I²C patent
to use the components of the I²C system, provided the system conforms to the I²C
specifications defined by Philips.”
I²C is a trademark of Philips Corporation.
09-JAN-07