Philips 220X - Manual (Page 34)

Subject to technical alterations, as well as to changes of the design and the colour
34
INSTALLATION ACCESSORIES
1 input/ 2 outputs (HD15 m / f)
Frequency 250 MHz
Supports 1920x1440 pixels @ 60 Hz
Supports DDC, DDC2, DDC2B at output 1
Metal housing 130x75x42 mm
Power supply DC 9V, 180mA
Supplied with connection cable VGA 1.8 m (m / f)
VGA signal amplifers / splitters
Similar to 5778-10 but with
1 input / 4 outputs (HD15 m / f)
Power supply DC 9V, 220mA
Supplied with connection cable VGA 1.8 m (m / f)
VGA extender No. 7488
VGA via CAT5 cable
VGA transmission via CAT5 cable up to 100 m
Fine adjustment of image quality
Suitable for protected CAT5 and CAT6 cables
Consisting of sender and receiver
Connection cable VGA, ca. 15 cm
Sender:
1 input (HD15 m) / 1 loop output (HD15 f) and RJ45 (f)
Receiver:
1 input (RJ45 f) / 1 output /HD15 m)
Size of casing (sender and receiver) each 64x29x24 mm
Power supply: 9 V DC - 30mA
20 m 35 m 50 m 65 m 80 m 100 m
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ +
++ ++ ++ ++ + +
++ ++ ++ + + –
++ ++ + + – –
Image quality in relation to distance (at 60 Hz frequency)
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 1024
1600 x 1200
Monitor splitter Basic VGA 1 : 2 No. 5778-10
Monitor splitter Basic VGA 1 : 4 No. 6298-2
Monitor splitter Pro VGA 1 : 2 No. 7480-1
1 input / 2 outputs (HD15 all f)
Frequency 400 MHz (3 dB)
Supports HDTV
ID-Bit control
Metal housing 120x75x25 mm
Power supply 12 V DC, 95 mA
Incl. fixing material
Monitor splitter Pro VGA 1 : 4 No. 7480-2
Similar to 7480-1 but with
1 input / 4 outputs (HD15 all f)
1 input / 1 output (f / f)
Supports up to HDTV 1080p (1920x1080 pixels)
HDCP compatibility
can be further extended
Metal casing 49x49x20 mm
Power supply DC 5V
HDMI repeater Basic 1 : 1 No. 5778-5
HDMI repeater
DVI switcher
DVI Share 2 : 1 No. 5816-6
2 inputs / 1 output (f)
2 select buttons
4 status LEDs
Supports 1280x1024 pixels and DDC2
Hot Plug compatibility
Metal casing 153x75x42 mm
Power supply DC 9V, 300 mA
1 input / 2 outputs (f)
Supports 1600x1200 pixels @ 60 Hz
Max. cable length between splitter and projector 10 m
Metal casing 200x75x42 mm
Incl. power supply
DVI-D repeater Pro 1:1 No. 5778-4
DVI signal amplifiers/splitters
For DVI-D signals, to be connected with the end of
the cable (max. 10 m), extends the DVI connection
up to 10 m (depending on resolution).
1 input / 1 output (f)
Frequency 1.65 Gbit/s (Single Link)
can be further extended
Metal casing 60x65x30 mm
Power supply 12 V DC or 5V (400 mA) via
graphic card
DVI splitter Basic 1 : 2 No. 5778-3
1 input / 2 outputs (HD15 m/f)
USB connections type A / m, type A / f
Frequency 450 MHz
Supports 2048x1536 pixels
Plastic housing 70x72x25 mm
Power supply via USB
(USB-powered) DC 5V
Connection cable VGA 15 cm
Monitor splitter USBpower VGA 1 : 2 No. 5778-6
For HDMI signals, to be connected with the end of the cable (max. 10 m),
extends the HDMI connection up to 20 m.
VGA Booster 1 : 1 No. 5778-2
Signal amplifier up to a distance of 50 m
between booster and projector
(depending on resolution)
1 input / 1 output (HD15 m / f)
Frequency 250 MHz
Supports 1920x1440 pixels @ 60 Hz
Plastic housing 97x56x26 mm
Incl. power supply