Philips 220X - Manual (Page 27)

CONFERENCE CONTROLS
Subject to technical alterations, as well as to changes of the design and the colour
Dim.: 38 x 105 x 38 mm
Power supply: 100–240VAC /12 VDC, 1.25A
Outputs: Serial interface 9-pin SubD with 40cm cable
(incl. adapter 9 : 25-pin)
IR transmitter with 40 cm cable
4 relais 50 V max. /0.5 A
System bus (2 x RJ 45)
Network (RJ45)
Inputs: 2 power sensor
Connected to the system bus the PIXIE Pro System Control
becomes an operating panel.
27
PIXIE Pro NRC
The PIXIE Pro NRC is a comfortable control
system with network connectivity, which can
be configurated and controlled easily via
Internet browser.
The NRC system features a RS 232 interface
and an IR transmitter and can control a data/
video projector or a display.
Via four relais you can also control e.g. an
electrical ceiling lift or screen. Two sensor inputs
help to protect the projector and have an anti-
theft function.
Even several NRC systems connected to a
network can be installed in several rooms and
then controlled from a centre point.
Via additional pucks, which can be individually
connected with the system bus (Cat5 cable) in
series, other external devices (such as DVD
player, amplifier, room light, splitter and
selector) can be controlled via RS 232
interface, IR transmitter or relais.
Connected to the system bus the PIXIE Pro
System Control becomes an operating panel.
KINDERMANN PIXIE Pro NRC
Network Room Control
Operation via web browser or operating panel
Complete media control with RS 232, IR transmitter,
relais outputs, sensor inputs
Can be extended via system bus (IR, RS 232, relais)
PIXIE pro System Control can be used as
operating panel
Examples of application
The PIXIE Pro Network Room Control controls a projector, a screen, a DVD player via web
browser and uses the PIXIE Pro System Control as operating panel.
Accessories for additional control options
to extend the system
No. 5670 KINDERMANN PIXIE Pro NRC
Dim: 60 x 60 x 20 mm
For extending the system by 4 relais 50 V
max. / 0.5 A
NRC Relais Control Puck No. 5670-30
Dim: 60 x 60 x 20 mm
For extending the system by 4 IR transmitters
NRC IR-4 Control Puck No. 5670-20
Dim: 60 x 60 x 20 mm
For extending the system by 1 RS232 and
1 IR transmitter
NRC RS232/IR Control Puck No. 5670-10
screen
control pucks
PIXIE Pro System Control (operating panel)
notebook
for configuration
and operation
CAT5 Bus
RS 232
IR
data/video projector
CAT5 network
relais
CAT5 Bus
e. g. DVD player