Pioneer CD-IB100II - Manual (Page 10)

Searching for a desired track
You can select and play back tracks of your fa-
vorite artists and albums, etc. from
GENRE,
ARTIST and ALBUM. As an example, the fol-
lowing provides an explanation of the proce-
dure for selecting
“Jazz” for GENRE,
“Artist 2” for ARTIST and “Album B” for
ALBUM using the illustration in the previous
section entitled, Overview of playlist selection
and preference modes.
1 Use BAND (BAND/ESC) to switch to
GENRE.
GENRE is displayed for about two seconds.
Each time you press
BAND (BAND/ESC) the
display changes in the following order:
PLAYLIST (playlists)
—GENRE (genres)—
ARTIST (artists)
—ALBUM (albums)
! ALL is set for the default setting of GENRE,
ARTIST and ALBUM.
! Preference conditions are canceled when
switching from ALBUM to PLAYLIST. How-
ever, the list currently being played (under
the most recent preference conditions) con-
tinues to play until either of the following
procedures are performed with the a or b
(or
MULTI-CONTROL) button.
— A different list is selected
— A new preference list has been started
2 Use a or b (or MULTI-CONTROL) to se-
lect
“Jazz”.
Playback of
“Jazz” tracks will start.
3 Use BAND (BAND/ESC) to switch to
ARTIST.
ARTIST is displayed for about two seconds.
4 Use a or b (or MULTI-CONTROL) to se-
lect
“Artist 2”.
Playback of tracks from
“Album B” will start.
5 Use BAND (BAND/ESC) to switch to
ALBUM.
ALBUM is displayed for about two seconds.
6 Use a or b (or MULTI-CONTROL) to se-
lect
“Album B”.
Playback of tracks from
“Album B” will start.
7 Use c or d (or MULTI-CONTROL) to se-
lect the track you want to listen to.
Playback of the selected track will start.
Other preference setting
procedures
Preferences can also be set starting from
ARTIST or ALBUM.
When the genre of
“Album B” is not
known
First switch to
GENRE in step 1 and then can-
cel the preference conditions. Next, continue
the procedure starting from step 3.
When the genre and artist of
“Album B”
are not known
First switch to
GENRE in step 1 and then can-
cel the preference conditions. Next, continue
the procedure starting from step 5.
Notes
! If the genre has already been selected, only ar-
tists and albums of the selected genre can be
selected. If you want to select artists and al-
bums of a different genre, repeat the proce-
dure starting from step 1.
! ALL is set for the default setting of GENRE,
ARTIST and ALBUM.
Operating with different
head units
En
10
Section
03