Panasonic BT-3DL2550E - Manual (Page 26)

26
Main Menu
(continued)
*1 Remote control via RS-232C ends in error (error response: ER001) when “GPI PRESET1” or “GPI PRESET2”
is selected with the GPI function.
*2 TYPE1 and TYPE2 area marker size depends on the “MARKER TYPE” setting.
*3 Display size for SD signals differ.
TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and ITU-R BT. 601-5 for PAL.
TYPE2: The effective horizontal area meets the EIA-RS170A for NTSC and ITU-R BT. 470-4 for PAL.
Sub menu Setting Description
GPI PRESET1 *1 4:3
13:9
14:9
CNSCO
VISTA
95% (16:9)
93% (16:9)
90% (16:9)
88% (16:9)
80% (16:9)
USER (16:9)
95% (4:3)
93% (4:3)
90% (4:3)
88% (4:3)
80% (4:3)
USER (4:3)
GPI PRESET1: Selects the marker displayed by the GPI terminal
“MARKER1 ON/OFF” (J page 53) operation.
GPI PRESET2: Selects the marker displayed by the GPI terminal
“MARKER2 ON/OFF” (J page 53) operation.
<4:3>
4:3 marker
<13:9> 13:9 marker
<14:9> 14:9 marker
CNSCO marker
VISTA marker
<95% (16:9)> 95% area marker for 16:9 aspect ratio
<93% (16:9)> 93% area marker for 16:9 aspect ratio
<90% (16:9)> 90% area marker for 16:9 aspect ratio
<88% (16:9)> 88% area marker for 16:9 aspect ratio
<80% (16:9)> 80% area marker for 16:9 aspect ratio
<95% (4:3)> 95% area marker for 4:3 aspect ratio
<93% (4:3)> 93% area marker for 4:3 aspect ratio
<90% (4:3)> 90% area marker for 4:3 aspect ratio
<88% (4:3)> 88% area marker for 4:3 aspect ratio
<80% (4:3)> 80% area marker for 4:3 aspect ratio
Displays using the USER value of 16:9 / 4:3.
GPI PRESET2 *1
MARKER TYPE *2*3 TYPE2
TYPE1
Selects conventional monitor or camera recableer marker size.
Marker size compliant with the camera recorder
(Panasonic)
The marker has the same size as that of the previous
model (BT-LH2600W).
CROSS HATCH OFF
LOW
HIGH
Turns the cross hatch grid on and off and sets its density.
Turns the display off
20/256 gradations (displays a light cross hatch grid)
70/256 gradations (displays a dense cross hatch grid)
BT-3DL2550PE(VQT2U10)_E.book 26 ページ ２０１０年７月８日 木曜日 午後２時１２分