Panasonic DP-3510 - Manual (Page 58)

58
B4·FLS
NOTE
Skyshot Mode
1 2
Place the
Original* Touch the JOB
MEMORY button
This setting should be carried out by a Key Operator.
# Select the COPIER SETTINGS in Function Setting
mode.
(See page 68)
$ Touch the FG buttons to advance to the 04/04
Display Screen of Copier Settings menu.
% Touch the 19 Set key operator code button.
& Enter the Key Operator’s ID Code and then press
the OK button.
( Touch the FG buttons to advance to the 03/05
Display Screen.
) Select 12 M1, size and 13 M2, size and enter the
original’s size.
* Touch the OK button.
∗
If using i-ADF, place original on the centre position of ADF Tray. The i-ADF tray can be
fed only 50 -105 g/m
2 plain paper.
C When changing the M1 or M2 Size, consult with the key operator.
C When using the manual skyshot mode, the M1 and M2 are turned On and other job
memory cannot be used.
C To reset the manual skyshot mode, press the RESET key.
Changing the default M1/M2 size
3 4
Number of
Copies
5
Press
START Select Custom
Size (M1 or M2)
2
A
3
C C C C C Set 07 Manual Skyshot Mode in Copier Settings first. (See page 53)
Upper-
Left
Corner
Platen
■ ■ ■ ■ ■ Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in advance.
Other Features
P058_4510(pb).p65 7/31/02, 10:45 AM 58