PYLE Audio PLD184V - Manual (Page 11)

BASIC OPERATION
10
4.BAND BUTTON
In RADIO mode, press the BAND button
repeatedly to select bands in following
order:
(For 2 Bands)
FM1
AM1
FM2 FM3
AM2
5.EQ BUTTON
Swing the knob in the direction of the
EQ to turn to equalization function and
to select desired audio mode.
There are four kinds of mode as below:
JAZZ CLAS POP ROCK
6-7-8-9-10-11.PRESET STATION
A. To memorize the current frequency,
press any one of the six preset buttons
[1-6] on the front panel or on remote
controller hold for more than 2 seconds
B. To recall the preset memory, press
one of the preset buttons [1-6].
C. Press button to select the first
track/chapter to play.
a. In the state of VCD/CD/MP3 discs
playing, press the button on the front
panel to select the first track/chapter
to play.(depend on the disc used VCD)
b. In the state of DVD disc playing, the
1TOP button is not available.
D. Long press button to select
repeat mode as follow.
1/TOP
2/RPT
DVD:
CHAPTER REPEAT ON TITLE REPEAT ON
REPEAT OFF
VCD/CD:
REP-ONE REP-ALL
a.Continuously repeat at the current
chapter/track, when selected
REP-ONE mode.
b.continuously repeat all chapter/track
on the current disc, when select the
REPEAT ALL mode.
c.REPEAT feature does not support
VCD2.0 (with PBC ON).
E.Long press button to scan disc.
a. In the state of VCD/CD disc playing,
press the 3/INT button on front panel
to play the previous 10 seconds part of
each track/chapter on disc.
(depend on the disc used for VCD)
b. In state of DVD/MP3 disc playing,
the 3/INT button is not available.
F.Long press to play disc in
random.
a. In the VCD/CD/MP3 disc playing,
press the 4/RDM button on front panel
to play in random
(depend on the disc used for VCD).
b. In the DVD disc playing, the 4/RDM
button is not available.
3/INT
4/RDM
12.AS/PS BUTTON
When shortly pressing the APS button
on the front panel or the A/P button on
the remote controller, the radio searches
for each preset station. When the field
strength level is more than the threshold
level of stop level, the radio is holding at
that preset number for few seconds with
releasing mute, and then searches again.
In FM band, FM 1,FM 2 and FM 3 is
checked one at a time When long
pressing the APS or A/P button (more
than 1 second), the radio searches from
the current frequency and checks the
signal strength level until 1 cycle search
is finished. And then 6 strongest stations
are preset to the corresponding preset
number.
The AS operation is implemented in the
each band of selected band. When the
AS operation is finished, the radio
executes the preset scan.