Philips VR150/07 - Manual (Page 14)

EN
Automatic switch-off
If you haven’t used the video recorder for a few
minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel
this function to use the video recorder as a tele-
vision receiver.
1. 1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2. 2. Press . The main menu will appear.
3. 3. Select 'VCR SET UP' using or
and confirm with .
4. 4. Select 'AUTO STANDBY' using or
.
5. 5. Select 'OFF' (no automatic switch-off) or 'ON'
(automatic switch-off) with
.
6. 6. To end, press .
Clock Display
This function allows you to switch the VCR dis-
play off. It is useful in case you feel disturbed by
the display-brightness while watching TV in a
dark room. It also reduces the power consump-
tion.
1. 1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2. 2. Press . The main menu will appear.
3. 3. Select 'VCR SET UP' using or
and confirm with .
4. 4. Select 'CLOCK DISPLAY' using or
.
5. 5. Select 'OFF' (no clock display) or 'ON' (clock
display on) with
.
6. 6. To end, press . STATUS/EXIT
FWD 1- B
STOP C-L
PLAY B-K
FWD 1- B STOP C-L
PLAY B-K
MENU
STATUS/EXIT
FWD 1 - B
STOP C-L
PLAY B-K
FWD 1- B
STOP C-L PLAY B-K
MENU
SELECT K L CHOOSE B
STATUS DISPLAY [ON]
BLUE BACKGROUND [ON]
→AUTO STANDBY [ON]
CLOCK DISPLAY [ON]
END=EXIT
14
SELECT K L CHOOSE B
STATUS DISPLAY [ON]
BLUE BACKGROUND[ON]
AUTO STANDBY
[ON]
→CLOCK DISPLAY [ON]
END=EXIT
HG271BD(EN).qx3 04.1.23 8:25 PM Page 14