Philips VR150/07 - Manual (Page 12)

12 EN
How to change a programmed
recording (TIMER)
1. 1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2. 2. Press . The main menu will appear.
3. 3. Select 'TIMER' with or .
Then press .
4. 4. Select 'ONCE', 'DAILY' or 'WEEKLY' record-
ing with
or . Then press
.
5. 5. Select a TIMER block with . (The flashing
number indicates an empty TIMER block.)
6. 6. Press to delete information and input
correct information with .
7. 7. To end, press .
8. 8. Switch off with .
Problems and solutions for
programmed recordings
STANDBY/ON y y
STATUS/EXIT
0..9
CLEAR
0..9
FWD 1 - B
STOP C-L PLAY B-K
FWD 1- B
STOP C-L PLAY B-K
MENU
Error message: ' ' flashes in the video recorder
display
• No cassette was inserted. Insert a cassette and
switch off the video recorder using .
Cassette was ejected as soon as the
button was pressed
• A cassette without the security tab was inserted.
Undo the erase protection (chapter 'Manual record-
ing', section 'Preventing accidental erasing') or
insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING' flash-
es on the TV screen
• The video recorder is switched on several minutes
before the start of a programmed recording. Switch
off the video recorder with
. A pro-
grammed recording (timer) will only function when
the video recorder is switched off.
Cassette is ejected during recording
• The end of the tape was reached during recording.
The video recorder does not react
• While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press
on the front panel. STOP/EJECT
STANDBY/ON y y
STANDBY/ON y y
STANDBY/ON y y
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
HG271BD(EN).qx3 04.1.23 8:25 PM Page 12