Pantech G700 User Manual

Page 9

QUICK START

If you use the unit for the first time, please follow the procedures as
below. :
Fit the SIM card into the unit.
If a user is registered to the network provider, he/she is supposed to be
provided with a ‘plug-in SIM’ which contains the user’s registration
information. (PIN, the existence of additional service, etc).

If required, keep pressing the [ ]key until the message of power off
appears.
1. Separate the battery from the unit.
2. After checking whether the SIM slot is empty, put the SIM card into the

slot.

3. If you would like to remove the SIM card, please push the SIM card in

the direction of the arrow shown in the picture as below.

Installing SIM card

QUICK START

As shown in the picture below, put the metal locators of the battery into
the holes located in the bottom of the unit.

1. Insert the metal locators of the battery into the hole located in the

bottom of the unit.

2. Press the Upper part of the battery until the sound of a ‘click’ is heard.

Battery Installation