Pantech G700 User Manual

Page 10

QUICK START

Battery Recharging

The power of the unit is supplied by the Li-ion battery charged. Ensure
that you use only authorized batteries and chargers. For more details,
please inquire at the nearest dealer.
The unit can be used while being recharged.
When the battery is installed in the unit, open the cover and connect an
adapter to the outlet located in the lower part of the unit. An adaptor is
provided together with the unit
When finishing recharging, separate the adaptor connection from the
outlet located in the lower part of the unit.

GETTING STARTED

Unit power on

Press the [ ]key and hold (approximately for 3 seconds) to turn on
the power of the unit.

Unit power off

Press the [ ]key and hold to turn off the power of the unit.

Making calls

Press the [ ]key and hold to turn on the power of the unit.
When “Insert SIM card” message appears, insert the SIM into the SIM
slot.
Unlock the handset by inputting the PIN (maximum 8 letters) when
applicable
When a correct PIN is entered, the system automatically detects the
network the user belongs to.
Press the telephone number including the area code at initial mode.
Then attempt to make a call by pressing the [ ]key. To make
international calls, press the [ ]key and hold until the sign ‘+’
appears and then input the country code, area code, telephone number
in your order. You can insert ‘P’ sign between each code and telephone
number in order to have approximately 2 seconds of pause by pressing
the [ ]key. You can make emergency calls without a SIM.
To make an emergency call, input number 112 and press [ ].