Panasonic CQ-CM130U - Manual (Page 7)

Preparation
1
Set your car's ignition switch to the ACC or ON position.
2
Press [SRC] (PWR: Power).
The 12-hour system is used for the clock.
1
Press [DISP] (CLOCK).
(clock display)
2
Hold down [DISP] (CLOCK) for more than 2
seconds.
Hour blinks.
3
Adjust the hour.
Hour entered.
[
[]: sets the hour ahead.
[
]]: sets the hour back.
4
Press [DISP] (CLOCK).
Minute blinks.
5
Adjust the minute.
Minute entered.
[
[]: sets the minute ahead.
[
]]: sets the minute back.
6
Press [DISP] (CLOCK).
Completed
Notes:
¡ “ADJUST” is displayed before adjusting the clock.
¡ Hold down [ ]]
or [ []
to change numbers rapidly.
Clock Display at Power Off
Press [DISP] to change the display.
Clock Setting
Display off
Clock display
First T
ime Power On
ACC
ON
–7–