Polaris 600 RMK Shift - Manual (Page 58)

55
PRE-RIDE INSPECTIONS
Start the Engine and Check
Before starting the engine, always refer to all safety warnings pertaining
to snowmobile operation. Never engage the starter when the engine is
running. Never start the engine without checking all vehicle components
to be sure of proper operation. See Before Starting the Engine beginning
on page 50.
n
Engine Stop Switch
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.
n
Ignition Switch
Make sure the engine stops when the ignition switch is turned to OFF.
n
Tether Switch
If your machine has a tether switch, remove the tether from the switch to
make sure the engine stops immediately.
n
Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
n
Mirror Adjustment
If equipped, adjust your mirrors so they can be used to their full advan-
tage.
n
Operating Area
Before driving away, check your surroundings. Be aware of obstacles
and make sure bystanders are a safe distance from the snowmobile.