Parrot DMP-BD80 - Manual (Page 9)

9
RQT9401
C Connecting to VIDEO OUT terminal
NECESSARY SETTINGS
≥[BD80] “Analog Audio Output”: “2ch
(Downmix) + 5.1ch” ( 31)
≥[BD80] Set “High Clarity Sound” on the
on-screen menu to “Off” ( 27).
(Otherwise, the video will not be output.)
≥Connect terminals of the same color.
≥High definition video cannot be output with
this connection.
Use connection A or B ( 8) for high
definition video.
§ With audio cables, connect the AUDIO
OUT terminals to the two-channel audio
input terminals of an analog amplifier/
receiver or system component in place of a
television to enjoy stereo sound.
To enjoy a richer sound
≥Use connections D, E, F or G (
9–10)
additionally.
(Unplug the red and white plugs.)
AUDIO IN
R L VIDEO IN
AUDIO/VIDEO IN
2ch AUDIO OUT §
Television
Audio/Video cable
(included)
VIDEO OUT
Back of the unit
NOTE
TIPS
Connecting an amplifier/receiver
D Connecting to HDMI AV OUT terminal
When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or
DTS-HD.
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI Audio
Output”: “On” ( 31)
≥“Digital Audio Output”: Depending on the
connected amplifier/receiver ( 30)
With this connection, you can use VIERA
Link “HDAVI Control” (
28).
≥Enjoying High Bit rate Audio with 7.1ch
speaker and 5.1ch speaker ( 20)
HDMI IN
Multi channel speakers
HDMI cable
Amplifier/receiver
HDMI
compatible
television HDMI IN HDMI OUT
Back of the unit
NOTE
TIPS
E Connecting to 7.1ch AUDIO OUT terminal [BD80]
When connected to a compatible amplifier/receiver using the 7.1ch AUDIO OUT terminals, you can enjoy surround sound.
NECESSARY SETTINGS
≥“Analog Audio Output”: “7.1ch” (
31)
≥Enjoying High Bit rate Audio with 7.1ch
speaker and 5.1ch speaker ( 20)
When connecting amplifier/receiver or
other devices with HDMI AV OUT terminal
≥“HDMI Audio Output” : “Off” (
31)
(Otherwise, depending on the
specifications of connected devices, the
audio from AUDIO OUT terminal may be
output as two channels only.)
When connecting a television with HDMI
AV OUT terminal (
8, A).
≥“HDMI Audio Output” : “Off” ( 31)
(Otherwise, the sound may not be output
with the desired audio.)
≥Depending on how the disc was recorded,
the audio may not be output properly on
the number of channels desired.
Cable connections
a Surround back speaker (L/R)
b Front speaker (L/R)
c Surround speaker (L/R)
d Center speaker
e Subwoofer





Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
Back of the unit
Multi channel speakers
Amplifier/receiver
NOTE
Ge
tting s
ta
rte
d
DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 9 ページ ２００９年２月６日 金曜日 午後５時２２分