beautypg.com

F connecting to 5.1ch audio out terminal [bd80, G connecting to digital audio out terminal, Connecting ac mains lead – Parrot DMP-BD80 User Manual

Page 10

background image

10

RQT9401

F Connecting to 5.1ch AUDIO OUT terminal [BD80]

When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.

NECESSARY SETTINGS
≥“Analog Audio Output”: “2ch (Downmix) +

5.1ch” (

31)

≥7.1 channel disc is mixed down to 5.1

channel audio.

Enjoying High Bit rate Audio with 7.1ch

speaker and 5.1ch speaker (

20)

When connecting amplifier/receiver or
other devices with HDMI AV OUT terminal
≥“HDMI Audio Output” : “Off” (

31)

(Otherwise, depending on the

specifications of connected devices, the

audio from AUDIO OUT terminal may be

output as two channels only.)

When connecting a television with HDMI
AV OUT terminal (

8, A).

≥“HDMI Audio Output” : “Off” (

31)

(Otherwise, the sound may not be output

with the desired audio.)

≥Depending on how the disc was recorded,

the audio may not be output properly on

the number of channels desired.

Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)

c Center speaker
d Subwoofer

Connect Audio
cables
to
terminals
corresponding to
the speakers you
have connected.

Back of the unit

Amplifier/receiver

Multi channel speakers

NOTE

G Connecting to DIGITAL AUDIO OUT terminal

You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL ([BD80]) or OPTICAL terminal.

With COAXIAL ([BD80]) or OPTICAL

NECESSARY SETTINGS
≥“Digital Audio Output” : Depending on the

connected amplifier/receiver (

30)

When connecting a television with HDMI
AV OUT terminal (

8, A).

≥“HDMI Audio Output” : “Off” (

31)

(Otherwise, the sound may not be output

with the desired audio.)

COAXIAL IN

OPTICAL IN

Back of the unit

Coaxial cable

Amplifier/receiver

Optical digital audio cable

NOTE

Connecting AC mains lead

Connect only after all other connections
are complete.

Conserving power
This unit consumes a small amount of power
even when it is turned off (“Quick Start”: “Off”,
less than 0.5 W). To save power when the
unit is not to be used for a long time, unplug it
from the household mains socket.

Back of the unit

AC mains lead (included)

Cooling fan

To a household mains socket
(AC 220 to 240 V, 50 Hz)

NOTE

TIPS

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 10 ページ 2009年2月6日 金曜日 午後5時22分