Panasonic KX-FP151 - Manual (Page 33)

33
Sending Faxes
Broadcast transmission !
This feature is useful for sending the same document to selected parties (up to 20 entries). First
program the entries, then see page 35 for transmission.
● To send to selected parties only once, see page 35.
Programming entries into the broadcast memory
SET MENU
STOP
1 Press p repeatedly until the following is
displayed.
Display:
2 Press # to select “BROAD”.
3 Press + or - until the desired entry is
displayed.
Example:
4 Press
w
.
Example:
● To program other entries, repeat steps 3 and
4 (up to 20 entries).
5 Press w to exit the program.
Note:
● If you enter the wrong entry, press { after
step 4 to erase the entry.
● Confirm the stored entries by printing a broadcast
programming list (p. 82).
REGISTERED
DIR=MIKE [01]
STORE:PRESS SET
MIKE
9876543210
DIR= [00]
NAVI.[+ @ -] @ & @ SET
DIRECTORY SET
NAVI.=
?
BROAD=#