Philips 140S User Manual

Page 57

4) Press the

button to adjust the brightness. An 80% brightness is recommended.

5) When finished with BRIGHTNESS, press the

button until CONTRAST is highlighted. Next, press the

button to adjust the contrast. A 100% contrast is recommended.

6) Press the

button to confirm your selection and return to the MAIN CONTROLS window. CLOSE

MAIN CONTROLS is highlighted.

Smart

Help

Smart Help

After returning to MAIN CONTROLS…

… to continue to VIDEO NOISE, press the

button until VIDEO NOISE is

highlighted. Next, follow steps 3 - 6 under VIDEO NOISE. (Note: VIDEO NOISE is not
available on all monitors. If not on your MAIN CONTROLS window, continue on to
OSD SETTINGS.)

… to exit completely, press the

button.

RETURN TO TOP OF THE PAGE

VIDEO NOISE

(not available on all Models)

VIDEO NOISE is composed of two steps, PHASE and CLOCK. PHASE adjustment reduces the horizontal
flicker of characters on the screen. CLOCK adjustment reduces the vertical flicker of characters on the
screen.

To adjust Phase and Clock, follow the steps below. If VIDEO NOISE is not available on your monitor,
continue on to OSD SETTINGS. Note: Before adjusting VIDEO NOISE yourself, press the AUTO button on
the front panel. If there is no improvement, then return to adjust PHASE and CLOCK.

The OSD Controls

file:///D|/Philips LCD/english/140S/OSD/OSD_CONT.HTM (6 of 16) [1/20/2001 3:04:15 PM]