Optimizing performance – Philips 140S User Manual
Page 13
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used
in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are
pressed, the adjustment controls for the BRIGHTNESS will show up.
.OK button which when pressed will take you to the OSD controls
POWER button switches your monitor on
Automatically adjust the horizontal position, vertical position, phase and
clock setting.
Optimizing Performance
For best performance, ensure that your display settings are set at 1024x768@60Hz (for 150P / 150B
/ 140S) or 1280x768, 60Hz (for 181AS).
●
Note:
You can check the current display settings by pressing the OSD "OK" button
once. Go into the Product Information. The current display mode is shown on the
item called RESOLUTION.
You can also install the
Flat Panel Adjust (FP Adjust) program
, a program for getting the best
performance out of your monitor, included in this CD. A step-by-step instructions is provided to guide
you through the installtion process. Click on the link to know more about this program.
More about
●
Installing your LCD Monitor
file:///D|/Philips LCD/english/140S/INSTALL/INSTALL.HTM (2 of 2) [1/20/2001 3:02:31 PM]