Power supply – Pertech 5300 User Manual

Page 15

Pertech Resources Inc.

November 2005

220321A

Power Supply

To avoid damage to the printer connect the Power Supply last.

1. Make sure the printer power switch is off.

2. Plug the Power Supply Cable into the printer. The power supply cable connector has a

locking mechanism to ensure that the cable stays fastened to the printer. When removing

the cable release the locking mechanism by pulling the mechanism away from the printer.

3. Plug the Power Supply Cable into a grounded outlet.

4. Turn the power switch on. The Power LED on the front of the

Printer will illuminate to green.

��

INPUT

Input Voltage:

90Vac To 255Vac

Input Current:

<.5Arms At 90Vac

Input Frequency

47Hz To 63Hz

OUTPUT

Output Voltage:

24VDC

Output Current:

.625A Minimum, No Minimum

Load Required

Rated Output Power: 15 Watts Minimum

Load Regulation:

+/- 5%

Line Regulation:

+/- 1%

Ripple Voltage:

250mV Peak To Peak

Inrush Current:

30A @ 115Vac, 40A @ 230Vac

Efficiency:

60% Minimum, 75% Typical

PROTECTION

Over-voltage:

25.6Vdc TO 30Vdc

Short Circuit:

Auto-Recover Upon Removal

Of Short

APPROVALS

Safety Marks:

UL, CSA or CUL, *CE, *TUV

EMI:

FCC Part 15 Class B

(Both Radiated And Conducted)

PHYSICAL

AC Plug:

On Wall Mount Adapter

DC Cord Length:

1830mm (6 FT.)

DC Plug:

3-pin Locking Mini Din

(See Pinout Above)

Connector Cable Locking

Mechanism

Ink Jet 535X Power Supply

Impact 537X Power Supply

NPUT