Panasonic AG-VP320 - Manual (Page 19)

19
Basic Operation
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH
/ or
NUMBER keys and press
ADD/DLT.
■ ■ ■ ■ ■ Time Zone Adjust ■ ■ ■ ■ ■ VCR’s Output
Channel
1) Press to select
“VCR’S OUTPUT
CH.,” and press SET.
2) Press SET.
3) Press ACTION.
After 3 seconds
• To Make Corrections,
repeat steps 1) ~ 3).
1) Press to select “SET
CLOCK,” and press SET.
*Important: If a remote control button does not work
when pressed, press the VCR button on the
remote and try the button again.
(Only when Auto Clock is set.)
3) Press ACTION.
• “TIME ZONE ADJUST”
returns to “0” if clock is set
manually.
VCR’s Output Channel
VCR
ACTION
SET
SELECT
POWER
NUMBER
keys
ADD/DLT
CH /
2) Press to select “TIME
ZONE ADJUST,”
and press SET to subtract
or add hour(s) as
necessary.
Add or Delete a Channel
DECK auto adjusts clock for DST.
(p. 17.)
Spring (First Sunday in April)
DST:ON
➛ ➛ ➛ ➛ ➛ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON
➛ ➛ ➛ ➛ ➛ Turns clock back one hour.
• If your area does not observe
Daylight Saving Time, select
DST:OFF.
• Keep these time changes in mind
when programming DECK for timer
recordings.
DST (Daylight Saving Time)