Polaroid PLA 4260 - Manual (Page 37)

37
Specifications
PLA-4260STB
Item Set-Top Box (Media Receiver)
Video System NTSC
Input Signal Interface
Front: 1 x Composite Video (1x RCA) + 1x S-Video (1x 4-Pin DIN) + 1x
Stereo Audio (2x RCA, Left + Right)
1x Analog RGB (1x 15-Pin D-Sub) + 1x Stereo Audio (1x Stereo
Mini Jack)
Rear: 1x RF Connector for internal NTSC Tuner
2 x [1x Composite Video (1x RCA) + 1x S-Video (1x 4-Pin DIN) +
1x Stereo Audio (2x RCA, Left + Right)]
2x [1x Component (3x RCA, YPbPr/YCbCr) + 1x Stereo Audio
(2x RCA, Left + Right)]
1x Digital Video (1x DVI) + 1x Stereo Audio (2x RCA, Left + Right)
HDCP support
Output Signal Interface 1x Subwoofer (w/o amp)
1x Headphone (mini-Jack stereo)
1x DVI (for PDP connection)
1 x DFP (for PDP connection)
Power Input 100 to 240 Vac
Power Consumption 30W (Max.)
Dimension Height 107.4mm
Width 420.7mm
Depth 224mm
Weight Net 3.5kgs±0.5kgs
Design and specifications are subject to change without notice.
“DCDi by Faroudja” is a registered trademark of Genesis Microchip, Inc.
All rights reserved.