Panasonic SC-AK250 - Manual (Page 10)

10
RQT8043
RQTV0196
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ESP
AÑOL
Discs (continued)
Changing a single disc (SINGLE CHANGE) a single disc (SINGLE CHANGE)
By main unit only
While one disc is playing, you can change the discs in other
trays.
1 Press [
0, SINGLE CHANGE].
2 Press [ 3,1] ~ [3, 5] to select the desired tray.
3 Change the disc.
4 Press [ 0, SINGLE CHANGE] again to close the tray.
Checking the track information
You can select a desired disc display mode.
Press [DISPLAY] during play or pause.
Elapsed play time Remaining play time
Elapsed
play time
➞
Remaining
play time
➞ Album Name
Tag (Artist)
➞
Tag (Track)
➞
Tag (Album)
➞
Track Name
➞
➞
Note:
• When track number 25 or greater is playing, remaining play time
display shows “– –:– –”.
• When a title is longer than 9 characters, it will scroll across the
display. The scrolling will start after every 3 seconds.
• “NO TAG” is displayed if titles with tags have not been entered.
• Maximum number of displayable characters: approximately 32
• This unit can display album, track and artist name with MP3 ID3
tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support cannot
be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced play Advanced play
Program play
This function allows you to program up to 24 tracks.
1 Press [ 6, CD] and then [7, CLEAR].
2 Press [PROGRAM].
“PGM” appears.
3 Press [DISC] and then [1] ~ [5] to select the disc.
4 Press the numeric buttons to select your desired
track.
Repeat steps 3 to 4 to program other tracks.
5 Press [ 6, CD] to start play.
1 Press [DISC] and then [1] ~ [5] to select the disc.
2 Press [ 7, CLEAR].
3 Press [PROGRAM].
4 Press [ALBUM ( or )] to select your desired
album.
To select an album directly, press the numeric
buttons after pressing [ALBUM (
or )].
5 Press [ 4, / REW] or [¢, / FF] to select the
track.
To select a track directly, press the numeric buttons
after pressing [
4, / REW] or [¢, / FF].
6 Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
7 Press [
6, CD] to start play.
For two-digit track, press [ h10] once then the two digits.
For three-digit track, press [ h10] twice then the three digits.
To Action
cancel
program mode Press [PROGRAM] in the stop mode.
replay the
program Press [PROGRAM] then [ 6, CD] in the stop
mode.
add to the
program
Repeat steps 3 to 4 in the stop mode.
Repeat steps 4 to 6 in the stop mode.
check program
contents Press [ 4, / REW] or [¢, / FF] when
“PGM” is displayed in the stop mode.
The track number, program order and disc
number are displayed:
1 2 3 4 5
Program order Track number
The program order is displayed followed by the
album number and track number.
clear the last
track Press [DEL] in the stop mode.
clear all
programmed
tracks Press [ 7, CLEAR] in the stop mode. “CLEAR
ALL” is displayed. Within 5 seconds, press the
button again to clear all tracks.
Note:
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
RQTV0196-B.indd 10 RQTV0196-B.indd 10 2/23/07 4:49:14 PM 2/23/07 4:49:14 PM