2 installing the switch – Planet Technology FSD-1603 User Manual
Page 11
11
Figure 2-5 FSD-803 rear panel
Figure 2-6 FSD-1603 rear panel
Power Notice:
1. The device is a power-required device, it means, it will not work till it is pow-
ered. If your networks should active all the time, please consider using UPS (Un-
interrupted Power Supply) for your device. It will prevent you from network data
loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect
your Switch from being damaged by unregulated surge or current to the Switch
or the power adapter.
2.2 Installing the Switch
This part describes how to install your Fast Ethernet Switch and make connections
to it. Please read the following topics and perform the procedures in the order
being presented.
Note: This Switch does not need software configuration.
2.2.1 Desktop Installation
To install the Switch on desktop, simply follow the next steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the Switch.