Panasonic VL-GM201A - Manual (Page 18)

18
Introduction and Installation
To attach the power cable
L
While pressing on the button with a pointed object such as a screwdriver, insert the power
cable into the terminal connector.
L
To disconnect the power cable, press on the button while pulling out.
L
To attach an optional power cable, cut off about 12 mm ( 1 / 2 ") of the cable cover ( 1), then
push in firmly until the end of the cable is securely inserted into the power connection
terminal (
2).
To attach the wires
L Strip off of the wire cover so that about 9 mm ( 3 / 8 ") of the wire is exposed.
L
While pressing on the button with a pointed object such as a screwdriver, insert the wire into
the terminal connector.
L
To disconnect a wire, press on the button while pulling out.
Monitor station DC terminal
1 2 Power cable cross section
Button
Terminal connector
Button
Terminal
connector
12 mm
(
1 /
2
")
Correct Incorrect
Button Terminal connector
GM201A.book Page 18 Monday, April 4, 2005 5:10 PM