Planet Technology WSW-2401 User Manual
Page 41
36
4.4-2-2 Advanced
There are two section includes in Advanced setting which is Disable MAC Address Aging
out and Priority Queue Service After setup complete click Apply button.
Disable MAC Address Aging out
Ø Age-out Time: the number of seconds that an inactive MAC address remains in the
Switch
’s address table. The valid range is 300-765 seconds. The default value is 300 sec.
Ø Max Bridge Transmit Delay Bound: limit the packets queuing time in switch.
If enable,
the packets queued exceed will be drop. This valid value are 1sec, 2 sec, 4 sec and off
Ø Enable Low Queue Delay Bound: limit the low priority packets queuing time in switch. If
the low priority packet stays in switch exceed Max Delay Time, it will be sent. The valid
range is 1~255 ms. before enable this function the Max Bridge Transmit Delay Bound
must be enable.
Ø Broadcast Storm Filter Mode: provide off, 5%, 10%, 15%, 20% and 25% for broadcast
storm control.
Priority Queue Service
Ø
First come First Service: the sequence of packets sent is depend on arrive order
Ø
All high before low: the high priority packets sent before the low priority packets
Ø Weight Round Ratio:
s
elect the preference given to packets in the Switch
’s high-priority
queue. These options represent the number of high priority packets sent before one low
priority packet. For example: High weight: 5 and Low weight 2. It means WSW-2401
sends 5 high priority packets before sending 2 low priority packets.
Ø
Qos Policy: provide 0~7 priority level