Planet Technology WSW-2401 - Manual (Page 19)

14
3.5-3 Trunk Configuration
You can configure port trunk group
Ø Select
Ø Use TAB key move to the port that you want to add as trunk group
Ø Use Space key to mark the port
Ø Use TAB key move to trunk# (eg turnk 1, trunk 2 …etc) to change the trunk# value to
Static or LACP
Ø Press to save the configuration
3.5-4 Port Mirroring Configuration
You can configure Port mirroring function
Ø Select
Ø Mirroring State: The default value is “disable”. To enable port mirroring you must select
one of port mirror:
l RX: RX packet only
l TX: TX packet only
l Both: RX and TX packet
Ø Analysis Port: All of the packets of mirroring port will be duplicated and sent to Analysis
port
Ø Port State: select the ports that want to mirrored
Ø Use Space key to mark the port that want to mirrored
Ø Press to save the configuration