Multi-cd player, Basic operations 50, Selecting a track directly 50 – Pioneer DEH-P65BT User Manual

Page 50: Introduction of advanced, Operations, Available accessories, Basic operations, Selecting a track directly, Introduction of advanced operations

Multi-CD Player

Basic Operations

You can use this unit to control a multi-CD
player, which is sold separately.
! Only those functions described in this man-

ual are supported by 50-disc multi-CD
players.

! This unit is not designed to operate disc title

list functions with a 50-disc multi-CD player.
About the disc title list functions, please
refer to Selecting discs from the disc title list
on page 53.

1 Track number indicator
2 Disc number indicator
3 Play time indicator

Press SOURCE to select the multi-CD

player.

Select a disc you want to listen to with

the 1 to 6 buttons.

! For discs 1 to 6, press the corresponding

button number.

! For discs 7 to 12, press and hold the corre-

sponding numbers, such as

1 for disc 7,

until the disc number appears in the dis-
play.

# You can also sequentially select a disc by
pushing

MULTI-CONTROL up or down.

To perform fast forward or reverse,

push and hold MULTI-CONTROL left or
right.

To skip back or forward to another

track, push MULTI-CONTROL left or right.

Notes

! When the multi-CD player performs the pre-

paratory operations,

READY is displayed.

! If an error message such as ERROR-11 is dis-

played, refer to the multi-CD player owner

’s

manual.

! If there are no discs in the multi-CD player ma-

gazine,

NO DISC is displayed.

Selecting a track directly

The operation is basically the same as that of
the built-in CD player.
For details concerning operation, refer to Se-
lecting a track directly on page 17.

Introduction of advanced
operations

You can use

COMP/DBE (compression and

DBE) only with a multi-CD player that supports
them.

Press MULTI-CONTROL to display the

main menu.
FUNCTION or AUDIO appears on the display.

Use MULTI-CONTROL to select

FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.

Turn MULTI-CONTROL to select the

function.
Turn

MULTI-CONTROL to switch between the

functions in the following order:
REPEAT (repeat play)

—RANDOM (random

play)

—SCAN (scan play)—PAUSE (pause)—

COMP/DBE (compression and DBE)

—

ITS PLAY (ITS play)

—ITS MEMO (ITS program-

ming)

—TITLE INPUT (disc title input)

# To return to the playback display, press BAND.
# If you do not operate functions except for
ITS MEMO and TITLE INPUT within about 30 sec-
onds, the display is automatically returned to the
ordinary display.

Available accessories

Section