Pioneer DEH-P65BT - Manual (Page 28)

2 Press MULTI-CONTROL to search for
available cellular phones.
While searching,
SEARCHING flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device names
or
NAME NOT FOUND (if names cannot be
obtained) are displayed.
# If this unit fails to find any available cellular
phones,
NOT FOUND is displayed.
3 Push MULTI-CONTROL up or down to
select a device name you want to connect.
4 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting,
CONNECTING flashes. To
complete the connection, please check the de-
vice name (e.g.,
PIONEER BT UNIT) and enter
the link code on your cellular phone. If the
connection is established,
CONNECTED is dis-
played.
You can edit the device name. Refer to Editing
device name on page 45.
# If the connection failed, ERROR is displayed.
Check the cellular phone, then try again.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 44.
Note
Depending on the type of cellular phone, registra-
tion is available only from a cellular phone. (Refer
to Using a cellular phone to initiate a connection
on this page.)
Using a cellular phone to initiate a
connection
Putting the unit in CONNECTION OPEN mode
allows you to establish a Bluetooth wireless
connection from your phone. You may need to
refer to the operation manual that came with
your phone if you are unsure how to initiate a
connection from your phone.
1 Use MULTI-CONTROL to select
CONNECTION OPEN in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
CONNECT WAITING is displayed and the unit
is now on standby for connection from cellular
phone.
3 Use cellular phone to connect to this
unit.
# Operation varies depending on the type of
your cellular phone. Refer to the instruction man-
ual that came with your cellular phone for de-
tailed instructions.
# You may need to enter the link code on your
cellular phone to complete the connection.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 44.
Disconnecting a cellular phone
When you are done using your phone with this
unit, you can close the Bluetooth wireless con-
nection.
1 Use MULTI-CONTROL to select
DISCONNECT PHONE in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After the disconnection is completed,
DISCONNECTED is displayed.
Registering connected cellular
phone
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with Blue-
tooth wireless technology. A total of three
phones can be registered.
1 Use MULTI-CONTROL to select
SET PHONE in the function menu.
2 Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
Operating this unit
En
28
Section
02