Storing and recalling broadcast, Frequencies, Introduction of advanced – Pioneer DEH-P65BT User Manual

Page 12: Operations, Operating this unit, Storing and recalling broadcast frequencies, Introduction of advanced operations

3 Frequency indicator
4 Stereo (

5) indicator

Shows when the selected frequency is being
broadcast in stereo.

5 LOC indicator

Shows when local seek tuning is on.

Press SOURCE to select the tuner.

Press BAND to select a band.

Press

BAND until the desired band is dis-

played,

FM1, FM2, FM3 for FM or MW/LW.

To perform manual tuning, push

MULTI-CONTROL left or right.

To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.

# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right you can skip stations. Seek tuning starts as
soon as you release

MULTI-CONTROL.

Storing and recalling broadcast
frequencies

You can easily store up to six broadcast fre-
quencies for later recall.
! Up to 18 FM stations, six for each of the

three FM bands, and six MW/LW stations
can be stored in memory.

When you find a frequency that you

want to store in memory press LIST.

Use MULTI-CONTROL to store the se-

lected frequency in memory.
Turn to change the preset number; press and
hold to store.
The preset number you have selected will
flash and then remain lit. The selected radio
station frequency has been stored in memory.

# You can also press and hold one of the preset
tuning buttons

1 to 6 to preset the desired fre-

quency.

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station; press to select.

# You can also change the station by pushing
MULTI-CONTROL up or down.
# You can also recall stations assigned to preset
tuning numbers

PCH1 to PCH6 by pressing one

of the preset tuning buttons

1 to 6.

# If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.

Introduction of advanced
operations

Press MULTI-CONTROL to display the

main menu.
FUNCTION or AUDIO appears on the display.

Use MULTI-CONTROL to select

FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.

Turn MULTI-CONTROL to select the

function.
Turn

MULTI-CONTROL to switch between the

functions in the following order:
BSM (best stations memory)

—REGIONAL (re-

gional)

—LOCAL (local seek tuning)—PTY

(program type selection)

—TRAFFIC (traffic an-

nouncement standby)

—AF (alternative fre-

quencies search)

—NEWS (news program

interruption)

# If MW/LW band is selected, you can only se-
lect

BSM or LOCAL.

# To return to the frequency display, press
BAND.
# If you do not operate functions within about
30 seconds, the display is automatically returned
to the ordinary display.

Operating this unit

Section