Philips CED370/00 - Manual (Page 29)

30 EN
1
Pair your device with the unit.
2
Start play music via your device.
If your device support AVRCP. •
1
Touch >[Media]>[BT] to access
Bluetooth menu.
The Bluetooth menu displays.
»
2
Touch .
Music play menu displays.
»
3
Touch to start play.
Adjust Bluetooth settings
You can change below Bluetooth settings:
•
[Password]: set paring code
• [BT]: turn on or off “Bluetooth” function
• [Auto Connect]: turn on or off “Auto
connect” function
• [Auto Answer]: turn on or off “Auto
answer” function
1
In Bluetooth menu, touch .
The option menu displays.
»
2
Touch on the option to change the setting.
1
If there is incoming call, [Incoming call...]
flashes on the screen. Speak into the
Bluetooth microphone.
2
When conversation ends, touch (red)
to terminate the call.
Tip
You can select to receive calls manually by set •
[Auto Answer] to [Off] status.
Switch phone call to the
mobile
If you do not want your passenger to hear your
incoming call, you can switch the call to the
mobile.
1
During talking, touch .
The voice is transferred from the unit’s
»
loudspeaker to the mobile phone.
Listen to music from Bluetooth
device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the unit. If the device also supports
Audio Video Remote Control Profile (AVRCP)
profile, you can use the control on the unit or
its remote control to play music stored on the
device.