Planet Technology 23x Indoor Speed Dome Camera CAM-ISD48 - Manual (Page 8)

4.2 DIP switches
Overview of DIP switches
There are three sets of DIP switch on board for different setup purposes.
location # bit quantity used for
DS1 8 Protocol / baud rate setup
DS2 8 Device ID setup
DS3 2 Network impedance
Refer to the picture on below for DIP switch locations.
DS3 DS1 DS2
In the following paragraphs are the detail descriptions of the three main setups the
installer must do, before hardware mounting and cabling work should begin.
. .
User’s manual 8