Planet Technology 23x Indoor Speed Dome Camera CAM-ISD48 - Manual (Page 23)

5.6 Use External Housing (with CAM-OH)
To operate speed dome cameras and maintain all functions in normal in severe
temperature conditions, i.e. below -10
o
C or above 45
o
C, external housing is
required.
CAM-OH has included two brackets (Ceiling-mount and Wall-mount bracket). You
can choose which one you will like to used.
Inside the housing, the mounting base (item # 3 in the
accessory list) is already built before it leaves factor. (see
picture on the right).
Wall mount Installation Procedure
1. Take the wall mount bracket, put it on the target place and fix it with the
supplied screws (total of 4).
2. Take the cover-screw off from the bracket, and remove the cover.
. .
User’s manual 23
Remove this screw
3. Please stuff the water proof rub ring into the bracket. Then attach the bracket
and lock it to the housing. Tight them on with screws.