Planet Technology 23x Indoor Speed Dome Camera CAM-ISD48 - Manual (Page 45)

. .
User’s manual 45
9. Pre-defined System Functions
Power-up action
After the power is first applied to a dome it will perform a self-test procedure. This
calibrates and checks the basic functions of the dome. External controls are
overruled during this self-test period.
After the self-test, the PTZ camera will be ready for control. If the device was
running the Auto-pan function before power was broken, the speed dome will
retrieve Auto Scan function until new control is given by an operator.
Tour group
The speed dome software automatically groups the first 16 presets into 4 tour
groups. i.e. presets 1 ~ 4 is owned by group 1; Preset number 5 to 8 belong to
group 2… etc.
When tour function is initiated, the P/T mechanism will start scanning automatically
around all the presets included in the group.
How to initiate tour function is subject to controllers.