Polaroid DVC-2010 - Manual (Page 9)

8
1 Press POWER button to power on.
Press DVD/VCR button to select VCR mode.
2 Insert the desired tape.
3 To playback, press
button.
If the playback picture is partially noisy, adjust with
TRACKING +/- button on front panel.
VCR Playback
4 To stop, press button.
• To pause, press button in playback mode.
5 To playback forward fast or to reverse, press o r
button, respectively.
• Press EJECT button on the front panel or OPEN/CLOSE
button on remote control to remove the tape
6 To monitor Video 1, Video 2, or TV, press INPUT SEL. button
on remote control.
Recording a Television Show
1. Turn on the Combo Player by pressing the power button.
2. Press the VCR button to change into VCR mode.
3. Turn on your TV and select channel 3 or select AV input.
4. Insert a blank tape or a tape that you wish to record over.
NOTE: VCR tapes have a recording tab that needs to be in place in
order to record. If the tab is not in place, you will not be able to record
on the tape and the tape will eject when you push the record button.
5. Press the Speed button on your Combo Player's remote to select
the desired recording speed (SP or SLP).
6. Select the desired channel that you wish to record by using the
CH+/- buttons on your Player Combo remote.
7. Press the REC button on your Combo Player's remote to begin
recording.
8. Press
button to pause recording, press again to resume.
Recording automatically cancels if the Combo Player is left on pause
for five minutes.
9. Press the button to stop recording.
To playback DVD during recording with video, insert a DVD
disc.
• Place the desired DVD disc on DVD tray, press DVD button
to switch into DVD mode and press button.
1. Press the DVD button to switch to DVD mode.
2. Insert the DVD disc you wish to record.
3. Insert a blank tape or a tape you wish to record over.
4. Press REC button.
5. To stop copying, press the VCR button and then press the
button. If you don't, the VCR will continue recording the DVD disc.
NOTE: This feature will not work with copy protected DVD discs.
This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and other
intellectual property rights owned by Macrovision Corporation and other right owners Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
WATCHING A DVD WHILE YOU RECORD A VHS VIDEOTAPE
COPYING DVD DISCS TO VHS VIDEOTAPE
One-Touch Recording(OTR) allows you to record in 30-
minute increments up to 4 hours at the touch of a button.
1 Start Recording
Follow the instructions on “Recording”.
2 Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording(OTR).
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
•The VCR&DVD PLAYER stops recording automatically when
the time has elapsed.
4 Press button to stop recording mode.
ONE TOUCH TIMER RECORDING(OTR)
RECORDING FROM DIGITAL CABLE OR SATELLITE
1. Follow directions 1-5 under "Recording a Television Show".
2. Turn on your digital cable or satellite receiver and turn the
receiver to the channel you wish to record.
3. Press the REC button on your Combo Player's remote to
begin recording.
*Please note: when recording from a digital cable or satellite
receiver, you will not be able to record one channel and view
another. The player must by tuned to channel 3 or 4 and the
digital cable or satellite receiver must be tuned to the desired
recording channel.