beautypg.com

Tape handling, Vcr setting – Polaroid DVC-2010 User Manual

Page 11

background image

10

• Operates in stop mode.

• Press VCR button to select VCR mode and follow the

procedure below.

1 Press the SETUP button on the remote control.
2 Press the

button to highlight and select (Enter) the

“Channel Set”.

3 Selecting cable or antenna viewing

• You must set the viewing mode for your VCR, choosing either

CABLE (cable system connection) or ANTENNA(antenna

connection). To set the viewing mode:

• Press ENTER to toggle between CABLE and ANTENNA.

4 SELECT “Manual Set”

Move into “Manual set” with

button to select either add/erase

and press ENTER. Memorize channel and select the desired

channel when ENTER button is pressed, “Erase” converts into

“Add”.
Press NUMBER button and

/

button of remote control to

select the desired channel to memorize.

To check the memorized channels, press CH+/- button on

remote control. To delete Channels Manually, when ENTER

button is pressed, “Add” converts into “Erase”. Press NUMBER
button and

/

button on the remote control to select the

desired channel to delete.

To check the deleted channels, press CH+/- button on remote

control.

5 SELECT “Auto Preset”

• Press

button in Channel Set to highlight “Auto Preset”

• Press ENTER button to detect the channel automatically.

1 Press the SETUP button on the remote control. The initial

MENU is displayed.
2. Press the

button to select “Language Select” and press

ENTER button

3 Select the language among English, Spanish and French.

CHANNEL

ON-SCREEN MENU LANGUAGE

• Press DVD/VCR button to select VCR mode

1 Press the SETUP button on the remote control.
2. Press the

button to select “Option”, and press ENTER

button.

3. Press the

button to select “Auto Power Off”.

4. Press ENTER button, until the appropriate system is

selected.(“Yes” or “No”)

5. Press SETUP button to quit.

• Press VCR button to change into VCR mode

1. Press the SETUP button on the remote control.
2. Press the

button to select “Option”, and press

ENTER button.

3. Press the

button to select the “Output Channel”.

4. Press ENTER button, until the appropriate system is

selected. ( “CH3” or “CH4” )

5. Press SETUP button to quit.

• Press DVD/VCR button to select VCR mode

1 Press the SETUP button on the remote control.
2. Press the

button to highlight and select “Option”, and

press ENTER button.

3. Press ENTER button until the appropriate system is

selected.(“On” or “Off”)

4. Please press SETUP button to quit.

AUTO POWER OFF

SETTING THE OSD DISPLAY

RF OUT

Tape Handling

1. Do not use the following:

-Tape with mold

-Tape stained with juice or attachments

-Disassembled tape

2. Moisture condensation may occur and damage tape.

Moisture condensation damages the tape. Please use the tape

after the moisture condensation is disappeared.

3. After use, store tape vertically.

4. Do not store in the following places:

-High temperature and humidity

-Subject to direct sunlight

-Near strong magnetic materials such as speakers

VCR Setting