Polaroid DVC-2010 - Manual (Page 10)

9
SEARCH COUNTER ZERO
• Press DVD/VCR button to select VCR mode.
1 Press the SETUP button on the remote control.
2. Press the button to select the “Search”, and press ENTER button.
3. Press ENTER button at “Go To Zero Search” to start.
• As soon as the counter searches 0:00:00 , the tape will play
automatically.
SEARCH INDEX FORWARD/BACKWARD
• Press DVD/VCR button select VCR mode.
1 Press the SETUP button on the remote control.
2. Press the button to select the “Search”, and press ENTER button.
3. If your search is forward direction, highlight “Index Search(+)” Index
searching motion, then press ENTER button.
4. If your search is backward direction, highlight “Index Search(-)” Index
searching motion, then press ENTER button.
• The index signal is recorded on the tape automatically when the
recording is started. You can view a recording at a specific start point.
SEARCH INDEX NUMBER
• Press DVD/ VCR button to select VCR mode
1 Press the SETUP button on the remote control.
2. Press the
button to select the “Search”, and press ENTER button.
3. Press the button to select the “Index Number Search “,
and press ENTER button.
4. Index NUMBER setting method.
• If your search is forward direction, press up
button to select
desired Index Number.
• If your search is reverse direction, press down button to
select desired Index Number.
5 After setting up , Please Press ENTER Button.
SEARCH COUNTER
•Press DVD/VCR button to select VCR mode.
1 Press the SETUP button on the remote control.
2. Press the button to select the “Search”, and press ENTER button.
3. Press the button to select the “Counter Search”, and press
ENTER button.
4. Enter the desired time and press ENTER button.
• The counter appears on screen and the LED.
Search Function
VCR Setting
• Press DVD/VCR button to select VCR mode and follow the
procedures below.
1 Press the SETUP button on the remote control.
2 Press the ENTER button, while highlighting CLOCK SET.
3 Set the current date and time with
button or
NUMBER button.
For DATE SET, follow the order of Month/Day/ Year ; for TIME
SET, follow the order of Hour/Minute in CLOCK SET screen.
4 Press SETUP button after completion.
CLOCK
PROGRAMMING
1 In VCR mode press the SETUP button on the remote control .
2 Press the
button to select the “Program Set” and press
ENTER button.
3 Select “Channel”
• Move into desired channel signal with up /down button
and follow the order below.
cable video 1 video 2 Antenna
4 Select “Start Date”
• Move into “Start Date “with button and then, select the
desired number to record with up/down button or number button
5 Select “REC cycle”.
• Move into “REC Cycle” with button and then, select the
desired one with up/down button
• REC cycle changes like the orders.
One Time weekly weekdays Daily
6 Select Start Time
• Move into “Start Time” with button and then, select the desired
number to record with up/down button or number button.
7 Select End time
• Move into "End Time" with button and then, select the
desired number to record with Up/down button or number
button.
8 Select Tape Speed
• Move into "Tape Speed" with button and then, select the
desired speed with the up/down button.
• Recording speed will appear in the order shown below.
SP SLP
• Press SETUP button to exit after completion
• Press NEXT and PREV button to finish 8-event programming.
• Press the POWER button to activate timer recording.
• To cancel a program, press the SETUP button, then press the
button until "Program Set" is highlighted. Press the PREV or
NEXT buttons on the Combo Player's remote control until you
get to the program you wish to cancel. Press the CLEAR button
on your Combo Player's remote control to cancel the
programming.
There are 4 types of search modes you may select to find a segment on your tape.