beautypg.com

Operation, Starting the engine – Polaris Sportsman Touring 500 HO User Manual

Page 51

background image

47

OPERATION

Starting the Engine

1. Position the vehicle on a level surface outdoors or in a well-venti-

lated area.

2. Place the transmission in PARK.
3. Lock the parking brake.

Tip: The starter interlock will prevent the engine from starting if the transmission

is in gear and the brake is not engaged.

4. Turn the fuel valve on.
5. Sit on the vehicle.
6. Do not use the choke if starting a warm engine. Excessive use of the

choke can cause the spark plug to become wet fouled.

7. If the engine is cold, pull the

choke knob out until it stops.

Tip: The variable choke is fully on

when the knob is pulled com-

pletely out. The choke is off when

the knob is pushed completely in.

The choke can be adjusted gradu-

ally, depending on how much

choke is needed for starting. Be

sure the choke is off during opera-

tion, as excess fuel washing into

the engine oil will increase wear

on engine components.

8. If the knob doesn't stay where

positioned, increase the ten-

sion by rotating the tension

adjusting nut clockwise.

9. Move the engine stop switch to RUN.
10. Do not press the throttle while starting the engine.

Tension

Adjusting Nut

This manual is related to the following products: